TYPE NCB - HORIZONTAL END SUCTION PUMPS
Centrifugal pump meeting EN-733, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical or soft shaft seals and wear rings are available, depending on the required application. The pump can also be supplied coupled to a diesel engine.
Max. Flowrate : 675 cu/.m/hrMax. TDH : 129 m
TYPE NCBK – HIGH FLOWRATE END SUCTION PUMPS EXCEEDING EN733
One of the widest product ranges on the Made in Italy market, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical and soft shaft seals (standard) and wear rings are available, depending on the required application. Version for coupling to diesel engines available.
Max. Flowrate : 2300 cu.m/hrMax. TDH : 97 m
TYPE IR – STANDARDISED MONOBLOC ELECTRIC PUMP
One of SAER's longest-running product series, completely redesigned to offer the highest performance in terms of output and efficiency. Ideal for recirculation and air conditioning systems, water supply and pressurisation groups. Various types of mechanical seals are available, also for food contact applications.
Max. Flowrate : 450 cu.m/hrMax. TDH : 129 m
L SERIES VERTICAL INLINE PUMPS
The L series includes 27 models, from DN 32 up to DN 150, from 0,37 to 75 kW, 50 and 60 Hz, 2 and 4 poles. Applications: hot/cold water circulation for in line inlet/outlet pipe line, ideal for installation in series, directly to the conduit, in civil and industrial plants for heating, cooling, hot water for sanitary use and other civil and industrial applications. Available in different materials and configurations.
Max. Flowrate : 580 cu.m/hrMax. TDH : 90 m
TYPE MK – VERTICAL MULTISTAGE INLINE PUMPS
Compact, multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps are configured with a bearing designed to support the axial thrust of the pump and allow coupling to any other standardised motor. Dual wear ring and bushes to guarantee maximum reliability.
Max. Flowrate : 110 cu.m/hrMax. TDH : 394 m
TYPE TM/TMB – HORIZONTAL MULTISTAGE PUMP
One of the most complete product ranges in the sector, with over 160 different versions available. For applications where high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. This pump can also be coupled to diesel engines with SAE3 connection. Soft shaft seal as standard, various types of mechanical seal also possible.
Max. Flowrate : 850 cu.m/hrMax. TDH : 642 m
TYPE TMV – VERTICAL MULTISTAGE PUMPS
Suitable anywhere high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. Possibility to change outlet and inlet orientation. Various types of mechanical or soft shaft seals (standard).
Max. Flowrate : 310 cu.m/hrMax. TDH : 403 m
TYPE OP - HORIZONTAL MULTISTAGE PUMPS
Suitable for pumping clean water and chemically non-corrosive liquids, for residential uses, irrigation, agriculture and automated distribution in medium-small tanks.
Max. Flowrate : 40 cu.m/hrMax. TDH : 162 m
TYPE SKD – HIGH FLOW RATE SPLIT CASING PUMPS
One of the few examples of this type of product designed and produced in Italy, as proven by the short delivery times. High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard). Applications: dams, municipalities, power plants, mining, irrigation, water supply whenever high flow rates are required.
Max. Flowrate : 5000 cu.m/hrMax. TDH : 280 m
TYPE KPO/KPW/KSM - ELECTRIC SWIMMING POOL PUMPS
KPO/KPW self-priming electric pumps with large incorporated prefilter, high filter capacity. KSM self-priming electric pumps for swimming pools, suitable for large filtering structures, with high flow rates.
Max. Flowrate : 206 cu.m/hrMax. TDH : 22 m
TYPE NCA – SOLIDS HANDLING CENTRIFUGAL PUMPS
Suitable for pumping domestic and industrial foul water, viscous and corrosive liquids, liquids with fibrous and solid substances, agricultural slurry, as well as generally dirty and muddy water.
Max. Flowrate : 1600 cu.m/hrMax. TDH : 60 m